BCA Show Daily - Day 1 - 44

SUNTEC SINGAPORE

A part of

Show Daily | Tuesday 26 June 2018

MARINA BAY SANDS * SUNTEC SINGAPORE

ENENSYS Provides Products
for Broadcast Australia

NENSYS, Stand: 4H2-06, is providing
its T2Gateway and DTTCaster products
to enable Broadcast Australia (a BAI
Communications Company) / Free TV, trials
of next-generation broadcast technology in
Sydney.
The trial is assessing the performance
of DVB-T2 technologies in the Australian
environment, utilising both VHF and UHF
transmission with single frequency network
(SFN) operation.
Colin Prior, APAC Sales Manager at
ENENSYS, said: "We are pleased to
participate in this trial that will enable the

Australian broadcasters to confirm the
capabilities of DVB-T2 in their operational
environment and network configuration,
as well as ensure interoperability between
equipment manufacturers."
DVB-T2 is being considered to replace the
current DVB-T standard used for Australian
terrestrial television delivery. When combined
with new video compression technologies
(HEVC) and High Dynamic Range (HDR),
DVB-T2 enables broadcasters to deliver
significant improvements in picture quality at
lower bitrates.
Stephen Farrugia, Chief Technology Officer

at Broadcast Australia,
area from the Gore Hill
said: "The DVB-T2 trial
transmitter.
is an important step to
The VHF signal is received
validate that the terrestrial
off-air for rebroadcast at
television technology is
two low-power UHF 'child'
ready for next generation
transmission sites at Kings
broadcast,
enabling
Cross and North Head
Australian broadcasters to
using ENENSYS' DTTCaster
deliver the best possible
professional receivers.
viewing
experience
The DTTCasters receive
with optimal spectrum
the off-air VHF signal from
efficiency."
the 'parent' transmitter
Following
testing
at
and regenerate the T2-MI
Broadcast Australia's lab,
stream to enable the 'child'
Trial:
Gore
Hill
transmitter
the on-air trial uses an
transmitters to rebroadcast
ENENSYS T2Gateway to feed a DVB-T2 VHF
in SFN and multiple physical layer pipes.
'parent' transmitter covering the Sydney
www.enensys.com

Datavideo Presents HDBaseT Solution

If you are looking for a portable, easy to set up and use workflow, look no further than the HDBaseT Solution from Datavideo...

ur HDBaseT Solution kit comes with an
HS-1500T HDBaseT hand carried video
switcher and PTC-150T 30x HDBaseT pan,
tilt, zoom camera.
The HS-1500T is an HDBaseT video
switcher which allows power, HD video,
control, and tally to be transmitted over
a single Cat6 cable. It comes with three
HDBaseT inputs and one HDMI input. It also
has a built-in joystick for controlling the
Datavideo pan, tilt, zoom cameras.
In addition, there are preset buttons for
setting up your camera angles and saving
them in the preset memory. Each camera can
have four preset shots, making it extremely
convenient for users and eliminating the need
to have a separate camera controller. The HS-

1500T also has an integrated LCD monitor
for a quad view of all your inputs. Having
an all-in-one product that will do switching,
monitoring, and camera controlling makes it a
lot easier to produce any live events that are
on the go.
The PTC-150T is a 30x HDBaseT pan,
tilt, zoom camera that was made to work
seamlessly with the HS-1500T. All you need
to do is to run a single Cat6 cable from
the PTC-150T to the HS-1500T. HDBaseT
technology offers Power over Ethernet so
that you no longer need to find local power
connection for each camera. Set-up time is
cut in half with this workflow, saving you a lot
of time and money.
The Datavideo HDBaseT Solution is ideal for

Datavideo's HS-1500T and PTC-150T

any broadcast applications. To get a closer
look at the HS-1500T and PTC-150T, please

visit our booth 6E2-01.
www.datavideo.com

http://www.enensys.com http://www.datavideo.com http://www.interrasystems.com http://www.interrasystems.com

Table of Contents for the Digital Edition of BCA Show Daily - Day 1